-
hindexportag@gmail.com -
+91-9215651121, +91-9810156827 - Send SMS
Mouldboard Plough
Specifications
| FURROW | 3 |
| FRAME (mm) | 80 x 80 x 7 |
| DRAWBAR ROD (mm) | 50 (Solid Rod) |
| TYNE (mm) | 36 (Profile Cut Single Piece) |
| LENGTH (mm) | 1880 |
| HEIGHT (mm) | 1066 |
| BLADE (mm) | 10 |
| MOULD BOARD (mm) | 8 |
| BAR POINT (mm) | 40 x 25 Bar (Forged) |
| 3 POINT LINKAGE LEVER & CONNECTING ROD (mm) | 65 x 16 (Flat) & 32 (Square) |
| WIDTH OF CUT (mm) | 910 |
| DEPTH OF CUT (mm) | 350 |
| WEIGHT (Kg. Approx.) | 350 |
| TRACTOR POWER (HP) | 65-70 |
Mould Board Plough can handle the toughest ploughing job with outstanding penetration performance. The under frame and unit-to-unit clearance are adequate to cope with trashy conditions. Perfect alignment of the plough beams carrying the Mould Board bottom is maintained by virtue of the frame construction. The Mould Board will retain its mirror finish at all times, contributing to well-turned furrows. The plough has special wear resistant steel bottoms with bar points for toughest ploughing jobs. Bar point bottom ensures longer life as it can be extended or reversed and re-used till the last possible length
Explore More Products
